AEI Systems

VENOM_30mm Electrical Firing Unit GPMG 7.62 mm NSN 1005-99-964-2620 VENOM_30mm GPMG 7.62 mm NSN 1005-99-964-2620 For 7.62mm GPMG, MAG58 & M240 MG's VENOM_30mm GPMG 7.62 mm NSN 1005-99-964-2620 NSN 1005-99-964-2620 For 7.62mm GPMG, MAG58 & M240 MG's

Electrical Firing Unit – NSN 1005-99-964-2620

TYPE MG223A

For 7.62 mm GPMG, MAG58 & M240 MG’s

Description

Where a remote firing GPMG is an operational requirement for land or naval weapon mount installations, the Electrical Firing Unit and Recoil Buffer Mk.2 are required.

The Electrical Firing Unit incorporates the trigger mechanism safe/fire catch and electrical solenoid in the assembly.

The trigger mechanism housing consists of a deeply recessed rectangular block that accommodates the trigger group components and is closed by a cover plate.
Axis pins, protruding through the housing and cover plate, are secured in place each side by flat spring retainer clips.

The lower part of the housing is bored longitudinally to receive the solenoid rod. At the rear, the housing has a formed flange to receive the solenoid housing which is secured in place by four bolts and stiff nuts. An electrical socket assembly, on the rear lower side, provides the firing circuit connection. The solenoid operates between 23.5 and 28 VDC and has a rating of 40 seconds. Solenoid operation in excess of 40 seconds will damage the unit.

Function

The action of the Electrical Firing Unit  trigger mechanism is identical with that of the standard GPMG weapon, but the trigger movement is initiated by movement of the solenoid.

When the solenoid is energised by remote fire command the plunger and rod, bearing against the trigger projection, rotates the trigger and effects sear release. When remote fire command ceases, the plunger and rod are returned by action of the compressed plunger return spring.

Quality assurance & obsolescence management

Each Electrical Firing Unit manufactured by AEI Systems is hand built and mechanically and electrically function tested. Customers are encouraged to witness acceptance testing prior to dispatch for total ‘peace of mind’.

Obsolescence management guarantees total supportability of all Electrical Firing Unit’s supplied by AEI Systems now and long into the future.

Mounting

As per standard trigger mechanism; Quick release pins not supplied.

Electrical power supply
Power input;23.5 to 28 VDC
Solenoid coil resistance;5.17 ohms
Power duration;40 seconds max.
Connection;10SL-3P
Identification
ELECTRICAL FIRING UNIT L1A1
NSN 1005-99-964-2620
AEI Part No.AEI-12138
TYPE.MG223A
Data sheet

 

 

 

 

 

Clicking the Download button will open this data sheet in a new tab and it can be saved as a .pdf.

Download data sheet